Labret-Ohrstecker mit flacher Rückseite

A flatback labret stud is a body jewellery piece consisting of a straight post with a flat disc on one end and a decorative top on the other. Unlike standard labret studs with a rounded or domed back, the flat disc sits flush against the skin, reducing pressure and making it more comfortable for piercings in the lip, ear cartilage, nose, and other placements where a domed back would press into tissue.

Threaded labret studs have a screw mechanism where the decorative top threads onto or into the post. Internal threading, where the thread sits inside the post, is preferred because nothing rough passes through the piercing during insertion. Threadless labret studs, also called push fit labret studs, use a small bent pin on the top that inserts into a hollow post and is held in place by tension. Threadless tops and threaded tops are not interchangeable as the connection pin or thread is different on each system.

You need to know two measurements: gauge (post thickness) and post length. The most common gauge for ear and facial piercings is 1.2mm (16g). Lip and labret piercings may use 1.2mm or 1.6mm (14g) depending on the studio. For post length, 6mm is standard for healed piercings. If you are in the initial healing phase, your piercer may have fitted a longer post of 8mm or more to accommodate swelling. If you are unsure of your sizing, ask your piercer before ordering.

Implant grade titanium conforming to ASTM F136 is widely used in professional piercing for initial jewellery, including in healing piercings. It is nickel-free and biocompatible. However, whether a specific piece of jewellery is appropriate for your healing piercing depends on your individual circumstances including placement, healing progress, and health history. Always consult your professional piercer or a medical provider before changing jewellery in a healing piercing.

Yes. Flatback labret studs are used across a wide range of ear cartilage piercings including tragus, helix, flat, conch, rook, and forward helix, as well as facial placements including lip, medusa, Monroe, and nose. The flat disc back makes them particularly suited to cartilage piercings where a domed back would press uncomfortably against the inner ear.

Yes. Surgical steel conforming to ASTM F138 does contain a small amount of nickel, which is bound within the alloy structure. For the majority of people this presents no issue. However, individuals with a confirmed nickel allergy or sensitivity should choose implant grade titanium (ASTM F136) or another nickel-free material instead.

Threadless tops from different brands are often compatible as long as they share the same gauge and use the standard threadless pin format. However, compatibility is not guaranteed across all manufacturers as pin diameter, bend angle, and post inner diameter can vary. If you are mixing tops and bases from different sources, check compatibility carefully. When in doubt, buy a complete set including top and base from the same listing.

For threaded styles, hold the flat back disc steady against the skin and unscrew the top by rotating it to the left. For threadless (push-fit) styles, hold the post steady and pull the top directly outward with no twisting needed. When inserting a threadless top, push the pin into the post until it holds firm. If you are changing jewellery in a piercing that has not fully healed, this should be done by a professional piercer and not at home.