What are piercing jewellery tops?

Piercing jewellery tops are the decorative or functional end pieces that attach to a piercing post, labret stud, barbell, or dermal anchor. They are the visible part of the jewellery and are designed to be interchangeable, allowing you to change your look without replacing the full piece.

What is the difference between threaded and threadless piercing tops?

Threaded tops use a screw mechanism to attach to the post. Internally threaded tops screw onto a post where the threading is on the post itself — the top is smooth. Externally threaded tops have threading on the top piece that screws into a hollow post. Threadless (press-fit) tops use a bent pin that tensions into the post without screwing. Internally threaded and threadless systems are generally preferred for piercing use as they are less likely to catch on tissue.

Will any piercing top fit my current post?

No. Compatibility depends on the gauge of your post (most commonly 1.2mm or 1.6mm), the thread type (internally threaded, externally threaded, or threadless), and the post inner diameter. A top designed for a 1.6mm post will not fit correctly on a 1.2mm post. If you are unsure of your post specifications, consult the retailer you purchased it from or ask a professional piercer to confirm before buying a replacement top.

What are labret tops?

Labret tops are end pieces designed for flat-back labret studs — a post type widely used across ear piercings (helix, tragus, flat, conch), lip piercings (philtrum, Monroe, medusa), and nostril piercings. The top attaches to the front-facing end of the post and is the only visible part of the jewellery. They are available in threaded and threadless fittings depending on the post type.

What are dermal tops?

Dermal tops are the decorative pieces that attach to the exposed post of a surface anchor. The anchor foot sits beneath the skin; the post protrudes above the surface and the top screws onto it. Dermal tops are typically low-profile to reduce snagging risk, as surface anchors are placed in areas subject to movement and pressure. Flat-set gems and disc tops are common choices for dermal placements.

Can I change my piercing top myself?

On a fully healed piercing, changing a top is generally straightforward. On a healing or recently irritated piercing, it is strongly recommended to have a professional piercer perform any jewellery change to avoid disrupting the healing tissue. Dermal tops in particular should be changed with care, and in some placements should only be changed by a professional.

Which material is best for sensitive skin or metal allergies?

Implant-grade titanium tested to ASTM F136 is the recommended choice for individuals with metal sensitivities, as it contains no nickel. Implant-grade surgical steel (ASTM F138 / ISO 5832-3) is widely used but does contain trace bound nickel and is not recommended for those with a confirmed nickel allergy. Solid gold (14ct or 18ct) is another suitable option for healed piercings. If you have a known metal allergy, consult a medical professional before selecting a material.

Do you deliver piercing jewellery tops across the UK?

Yes. Monster Piercing offers fast UK delivery across the full range of piercing jewellery tops, including labret tops, dermal tops, threaded ends, and threadless ends. New customers receive a discount on their first order, applied at checkout.

Accessoire-Oberteile

73 - 96 of 163 products

Sortieren nach

Anzeigen als

Zurück
1
2
3
4
5
6
7
Weiter

Product Overview

Specifications

Professional Use

Safety & Material Notes

Ordering & Shipping

Disclaimer

FAQ

Piercing jewellery tops are interchangeable decorative or functional end pieces designed to attach to piercing posts, labret studs, and dermal anchors
Available in threaded ends (internally and externally threaded), threadless/press-fit ends, labret tops, and dermal tops
Suitable for use across ear, nose, lip, dermal/surface, and other healed piercing placements
Materials include implant-grade titanium (ASTM F136), implant-grade surgical steel (ASTM F138 / ISO 5832-3), solid gold, and bioflex/PTFE retainer options
Designed for style upgrades, like-for-like replacements, and compatible post swaps on healed piercings
Available in a range of gauges — most commonly 1.2mm and 1.6mm — to suit standard post sizes
Fast UK delivery available across the full piercing jewellery tops range

Top Type	Fitting System	Common Gauge	Typical Placement
Labret tops	Internally threaded / threadless	1.2mm, 1.6mm	Ear (helix, tragus, flat, conch), lip, nose, philtrum
Dermal tops	Internally threaded	1.2mm	Surface/dermal anchor placements (sternum, clavicle, etc.)
Threadless / press-fit ends	Press-fit pin tension	1.2mm	Flat-back labret posts, threadless systems
Internally threaded ends	Internal thread	1.2mm, 1.6mm	Internally threaded labret and barbell posts
Externally threaded tops	External thread	1.2mm, 1.6mm	Externally threaded posts (budget/legacy fittings)

Professional piercers and studios sourcing decorative or replacement tops for client jewellery setups
Implant-grade titanium tops (ASTM F136) are suitable for use in professional piercing contexts where biocompatibility is required — confirm stock grade before professional use
Internally threaded and threadless tops are preferred in professional settings due to reduced tissue disruption during insertion and removal
Dermal tops should be fitted and removed by a professional piercer where the anchor placement is in a high-movement or pressure-bearing area
Bulk and multipack pricing is available on select tops — contact Monster Piercing directly for studio or trade enquiries

Implant-grade titanium tops (ASTM F136) contain no nickel and are intended to support use by individuals with metal sensitivities — consult a medical professional if you have a confirmed nickel allergy before use
Implant-grade surgical steel (ASTM F138 / ISO 5832-3) contains trace bound nickel — not recommended for individuals with documented nickel sensitivity
Do not attempt to change piercing tops on unhealed or actively irritated piercings without professional guidance
Dermal tops should not be forced during removal — seek professional assistance if a top is tight or the anchor is disturbed
Externally threaded tops are not recommended for use on healing piercings due to the risk of tissue damage during insertion
All material and safety claims reflect information provided in the Monster Piercing product specification — confirm grade and standard at point of purchase if required for professional or clinical use

Fast UK delivery available across the full range of piercing jewellery tops
New customers receive a discount on their first order — applied at checkout
Bulk and multipack pricing available on selected tops and fittings
Orders are fulfilled for individual buyers, piercing enthusiasts, and professional studios across the UK
Full delivery timeframes and returns information are available at checkout — Not specified in provided data for exact lead times

Piercing jewellery tops sold on this page are intended for use on healed or professionally assessed piercings only. Aftercare requirements, healing timescales, and material suitability vary between individuals and piercing placements. The information provided on this page is for general guidance only and does not constitute professional medical or piercing advice. Consult a qualified professional piercer or licensed medical provider before changing jewellery on a healing or irritated piercing, or if you have a known metal sensitivity or skin condition. Monster Piercing accepts no liability for adverse outcomes resulting from self-administration of jewellery changes on unhealed or compromised piercings.

What are piercing jewellery tops?

Piercing jewellery tops are the decorative or functional end pieces that attach to a piercing post, labret stud, barbell, or dermal anchor. They are the visible part of the jewellery and are designed to be interchangeable, allowing you to change your look without replacing the full piece.
What is the difference between threaded and threadless piercing tops?

Threaded tops use a screw mechanism to attach to the post. Internally threaded tops screw onto a post where the threading is on the post itself — the top is smooth. Externally threaded tops have threading on the top piece that screws into a hollow post. Threadless (press-fit) tops use a bent pin that tensions into the post without screwing. Internally threaded and threadless systems are generally preferred for piercing use as they are less likely to catch on tissue.
Will any piercing top fit my current post?

No. Compatibility depends on the gauge of your post (most commonly 1.2mm or 1.6mm), the thread type (internally threaded, externally threaded, or threadless), and the post inner diameter. A top designed for a 1.6mm post will not fit correctly on a 1.2mm post. If you are unsure of your post specifications, consult the retailer you purchased it from or ask a professional piercer to confirm before buying a replacement top.
What are labret tops?

Labret tops are end pieces designed for flat-back labret studs — a post type widely used across ear piercings (helix, tragus, flat, conch), lip piercings (philtrum, Monroe, medusa), and nostril piercings. The top attaches to the front-facing end of the post and is the only visible part of the jewellery. They are available in threaded and threadless fittings depending on the post type.
What are dermal tops?

Dermal tops are the decorative pieces that attach to the exposed post of a surface anchor. The anchor foot sits beneath the skin; the post protrudes above the surface and the top screws onto it. Dermal tops are typically low-profile to reduce snagging risk, as surface anchors are placed in areas subject to movement and pressure. Flat-set gems and disc tops are common choices for dermal placements.
Can I change my piercing top myself?

On a fully healed piercing, changing a top is generally straightforward. On a healing or recently irritated piercing, it is strongly recommended to have a professional piercer perform any jewellery change to avoid disrupting the healing tissue. Dermal tops in particular should be changed with care, and in some placements should only be changed by a professional.
Which material is best for sensitive skin or metal allergies?

Implant-grade titanium tested to ASTM F136 is the recommended choice for individuals with metal sensitivities, as it contains no nickel. Implant-grade surgical steel (ASTM F138 / ISO 5832-3) is widely used but does contain trace bound nickel and is not recommended for those with a confirmed nickel allergy. Solid gold (14ct or 18ct) is another suitable option for healed piercings. If you have a known metal allergy, consult a medical professional before selecting a material.
Do you deliver piercing jewellery tops across the UK?

Yes. Monster Piercing offers fast UK delivery across the full range of piercing jewellery tops, including labret tops, dermal tops, threaded ends, and threadless ends. New customers receive a discount on their first order, applied at checkout.

Product Overview

Piercing jewellery tops are interchangeable decorative or functional end pieces designed to attach to piercing posts, labret studs, and dermal anchors
Available in threaded ends (internally and externally threaded), threadless/press-fit ends, labret tops, and dermal tops
Suitable for use across ear, nose, lip, dermal/surface, and other healed piercing placements
Materials include implant-grade titanium (ASTM F136), implant-grade surgical steel (ASTM F138 / ISO 5832-3), solid gold, and bioflex/PTFE retainer options
Designed for style upgrades, like-for-like replacements, and compatible post swaps on healed piercings
Available in a range of gauges — most commonly 1.2mm and 1.6mm — to suit standard post sizes
Fast UK delivery available across the full piercing jewellery tops range

Specifications

Top Type	Fitting System	Common Gauge	Typical Placement
Labret tops	Internally threaded / threadless	1.2mm, 1.6mm	Ear (helix, tragus, flat, conch), lip, nose, philtrum
Dermal tops	Internally threaded	1.2mm	Surface/dermal anchor placements (sternum, clavicle, etc.)
Threadless / press-fit ends	Press-fit pin tension	1.2mm	Flat-back labret posts, threadless systems
Internally threaded ends	Internal thread	1.2mm, 1.6mm	Internally threaded labret and barbell posts
Externally threaded tops	External thread	1.2mm, 1.6mm	Externally threaded posts (budget/legacy fittings)

Professional Use

Professional piercers and studios sourcing decorative or replacement tops for client jewellery setups
Implant-grade titanium tops (ASTM F136) are suitable for use in professional piercing contexts where biocompatibility is required — confirm stock grade before professional use
Internally threaded and threadless tops are preferred in professional settings due to reduced tissue disruption during insertion and removal
Dermal tops should be fitted and removed by a professional piercer where the anchor placement is in a high-movement or pressure-bearing area
Bulk and multipack pricing is available on select tops — contact Monster Piercing directly for studio or trade enquiries

Safety & Material Notes

Implant-grade titanium tops (ASTM F136) contain no nickel and are intended to support use by individuals with metal sensitivities — consult a medical professional if you have a confirmed nickel allergy before use
Implant-grade surgical steel (ASTM F138 / ISO 5832-3) contains trace bound nickel — not recommended for individuals with documented nickel sensitivity
Do not attempt to change piercing tops on unhealed or actively irritated piercings without professional guidance
Dermal tops should not be forced during removal — seek professional assistance if a top is tight or the anchor is disturbed
Externally threaded tops are not recommended for use on healing piercings due to the risk of tissue damage during insertion
All material and safety claims reflect information provided in the Monster Piercing product specification — confirm grade and standard at point of purchase if required for professional or clinical use

Ordering & Shipping

Fast UK delivery available across the full range of piercing jewellery tops
New customers receive a discount on their first order — applied at checkout
Bulk and multipack pricing available on selected tops and fittings
Orders are fulfilled for individual buyers, piercing enthusiasts, and professional studios across the UK
Full delivery timeframes and returns information are available at checkout — Not specified in provided data for exact lead times

Disclaimer

FAQ

What are piercing jewellery tops?

Piercing jewellery tops are the decorative or functional end pieces that attach to a piercing post, labret stud, barbell, or dermal anchor. They are the visible part of the jewellery and are designed to be interchangeable, allowing you to change your look without replacing the full piece.
What is the difference between threaded and threadless piercing tops?

Threaded tops use a screw mechanism to attach to the post. Internally threaded tops screw onto a post where the threading is on the post itself — the top is smooth. Externally threaded tops have threading on the top piece that screws into a hollow post. Threadless (press-fit) tops use a bent pin that tensions into the post without screwing. Internally threaded and threadless systems are generally preferred for piercing use as they are less likely to catch on tissue.
Will any piercing top fit my current post?

No. Compatibility depends on the gauge of your post (most commonly 1.2mm or 1.6mm), the thread type (internally threaded, externally threaded, or threadless), and the post inner diameter. A top designed for a 1.6mm post will not fit correctly on a 1.2mm post. If you are unsure of your post specifications, consult the retailer you purchased it from or ask a professional piercer to confirm before buying a replacement top.
What are labret tops?

Labret tops are end pieces designed for flat-back labret studs — a post type widely used across ear piercings (helix, tragus, flat, conch), lip piercings (philtrum, Monroe, medusa), and nostril piercings. The top attaches to the front-facing end of the post and is the only visible part of the jewellery. They are available in threaded and threadless fittings depending on the post type.
What are dermal tops?

Dermal tops are the decorative pieces that attach to the exposed post of a surface anchor. The anchor foot sits beneath the skin; the post protrudes above the surface and the top screws onto it. Dermal tops are typically low-profile to reduce snagging risk, as surface anchors are placed in areas subject to movement and pressure. Flat-set gems and disc tops are common choices for dermal placements.
Can I change my piercing top myself?

On a fully healed piercing, changing a top is generally straightforward. On a healing or recently irritated piercing, it is strongly recommended to have a professional piercer perform any jewellery change to avoid disrupting the healing tissue. Dermal tops in particular should be changed with care, and in some placements should only be changed by a professional.
Which material is best for sensitive skin or metal allergies?

Implant-grade titanium tested to ASTM F136 is the recommended choice for individuals with metal sensitivities, as it contains no nickel. Implant-grade surgical steel (ASTM F138 / ISO 5832-3) is widely used but does contain trace bound nickel and is not recommended for those with a confirmed nickel allergy. Solid gold (14ct or 18ct) is another suitable option for healed piercings. If you have a known metal allergy, consult a medical professional before selecting a material.
Do you deliver piercing jewellery tops across the UK?

Yes. Monster Piercing offers fast UK delivery across the full range of piercing jewellery tops, including labret tops, dermal tops, threaded ends, and threadless ends. New customers receive a discount on their first order, applied at checkout.

Price

Accessoire-Oberteile

Wholesale Form

Produkte vergleichen