What is a threadless labret?

A threadless labret is a two-part piercing jewellery system consisting of a flat-back post and a decorative top. The top is fitted with a tension pin that, when slightly bent and pressed into the hollow end of the post, holds the top securely in place without any threading. Removing the top requires a firm, straight pull to release the tension.

How does threadless jewellery work?

The decorative top has a thin pin extending from its back. Before insertion, this pin is bent slightly — typically between 15 and 45 degrees. When pressed into the post, the bend creates friction against the inner walls of the post tube, holding the top in place. The greater the bend, the more tension — though over-bending can deform the pin over time.

What is the difference between a threadless labret and a threaded labret?

A threaded labret top screws onto the post using an internal or external thread. A threadless labret top presses into place using a bent tension pin with no threads involved. The posts are not cross-compatible — threadless tops cannot be used on threaded posts, and vice versa.

What gauge threadless labret do I need?

Most cartilage piercings in the UK — helix, tragus, conch, flat — are pierced at 16g (1.2mm). Nostril piercings are often 18g (1.0mm), though 16g is also used. Medusa and philtrum piercings are typically 16g. If you're unsure, check your piercing documentation or ask your piercer before ordering.

What post length should I choose for a threadless labret?

For most healed cartilage placements, a 6mm post is standard. An 8mm post is common for placements where the anatomy requires a longer bar, or where some residual swelling is present. Medusa and philtrum piercings may require 8mm to 10mm. Your piercer can measure the correct length for your specific anatomy.

Are threadless labret tops interchangeable between brands?

Not reliably. While pin diameters are broadly standardised, post tube tolerances vary between manufacturers. A top from one brand may fit too loosely or too tightly in a post from another. For best results, use tops and posts from the same manufacturer or a confirmed compatible range.

Can I use a threadless labret for a new or healing piercing?

Threadless flat-back labrets are used by professional piercers as initial jewellery for certain placements because the flat back is better for tissue health than a protruding threaded end. However, the jewellery used in a new piercing should be selected and fitted by your piercer — not self-inserted. Do not change jewellery in an unhealed piercing without professional guidance.

What material threadless labret is best for sensitive skin?

Implant-grade titanium to ASTM F136 is the recommended choice for anyone with metal sensitivities or a nickel allergy. It is entirely nickel-free and biocompatible. Surgical steel contains nickel and is not appropriate for nickel-sensitive individuals, even though nickel release rates in healed piercings are generally low. The term hypoallergenic does not guarantee nickel-free construction — always check the specific material grade.

What piercings can use a threadless labret?

Threadless labret jewellery is suitable for a wide range of placements including helix, flat, tragus, conch, nostril, medusa, philtrum, lip, and flat lobe piercings. The flat-back design makes it particularly well-suited to placements where the back of the post sits against cartilage or soft tissue.

What is the difference between threadless and push-fit jewellery?

Push-fit jewellery presses a top into a tube end and relies on physical tolerance — the tightness of the fit — to stay in place. Threadless jewellery uses a bent tension pin as the active retention mechanism. They look similar and are often confused, but the systems are mechanically different and the components are not interchangeable.

Aufsteck-Labret

97 - 120 of 172 products

Sortieren nach

Anzeigen als

Zurück
1
…
3
4
5
6
7
8
Weiter

Der Monster-Halloween-Sale

25 % Rabatt auf alles · Wird an der Kasse automatisch angewendet · Über 1.500 Artikel

Endet Sa 31 Okt, 23:59 Uhr britischer Zeit

Product Overview

Specifications

Professional Use

Safety & Contraindications

Ordering & Shipping

Disclaimer

FAQ

Two-part threadless system: flat-back post and interchangeable decorative top secured by a bent tension pin — no threading required
Suitable for helix, tragus, conch, flat, nostril, medusa, philtrum, and flat lobe piercings
Available in 16g (1.2mm) and 18g (1.0mm) gauges with multiple post lengths from 6mm to 10mm
Decorative tops are interchangeable across compatible posts — one post, multiple styles
Style range includes flat discs, gem threadless labrets, opal threadless tops, spikes, and shaped pieces
Designed for healed piercings — flat back reduces pressure on tissue compared to protruding threaded ends
Available in implant-grade titanium, surgical steel, and gold options across the range

Specification	Option A	Option B	Option C
Gauge	16g (1.2mm)	18g (1.0mm)	Not specified in provided data
Post Length	6mm	8mm	10mm
Material	Implant-grade titanium (ASTM F136)	Surgical steel (ASTM F138 / ISO 5832-1)	Gold (grade not specified in provided data)
Top Fitting	Threadless tension-pin system	Threadless tension-pin system	Threadless tension-pin system
Nickel Content	Nickel-free (titanium)	Contains nickel (steel)	Not specified in provided data

Threadless flat-back labrets are widely used by APP-aligned piercing studios as initial and downsize jewellery for cartilage and facial placements
Flat-back design is preferred for tissue health in placements where a protruding reverse-threaded end would contact cartilage or mucosal tissue
Implant-grade titanium to ASTM F136 is the material standard recommended by the Association of Professional Piercers for use in healing piercings
Interchangeable top system allows studios to swap decorative ends during downsize appointments without removing the post from the piercing channel
16g is the standard gauge for most cartilage placements in UK professional studios; 18g is more common for nostril and fine jewellery applications
Professional piercers sourcing studio stock should confirm post tube tolerance and pin diameter specifications before mixing brands across tops and posts

Threadless labret jewellery is intended for use in healed or professionally assessed piercings only — do not change jewellery in unhealed piercings without consulting a professional piercer
Individuals with confirmed nickel sensitivity should select implant-grade titanium (ASTM F136) options only — surgical steel contains nickel and is not suitable for nickel-sensitive individuals
The term hypoallergenic is not regulated and is not equivalent to implant-grade or nickel-free — verify material grade before purchase if sensitivity is a concern
Incorrect post length can cause embedding (too short) or excessive movement and snagging (too long) — verify correct sizing with your piercer before ordering
Threadless tops from different manufacturers may not be cross-compatible despite similar appearance — mixing brands risks tops that fail to hold or are difficult to remove
If any redness, swelling, discharge, or persistent irritation occurs around a piercing, remove jewellery only under professional guidance and seek medical advice if symptoms persist

Fast UK delivery available on all threadless labret jewellery orders — delivery timeframes displayed at checkout
First-time customers are eligible for a discount on their first order — offer applied at checkout
Bulk and multipack pricing available on select fittings — check individual product listings for availability
Orders are dispatched from the UK — no international customs delays for UK mainland customers
If you are unsure of your gauge or post length, contact Monster Piercing before ordering or consult your piercer — sizing exchanges may be subject to standard returns conditions

All threadless labret jewellery sold by Monster Piercing is intended for use on healed or professionally assessed piercings. Aftercare and healing times vary by individual. Nothing on this page constitutes medical or professional piercing advice. Consult a qualified professional piercer or licensed medical provider before changing jewellery in any unhealed or healing piercing. Material safety information provided reflects general material standards — individual product specifications should be verified on each product listing before purchase. Monster Piercing does not accept liability for adverse reactions resulting from incorrect sizing, incompatible materials, or use in unhealed tissue contrary to professional guidance.

What is a threadless labret?

A threadless labret is a two-part piercing jewellery system consisting of a flat-back post and a decorative top. The top is fitted with a tension pin that, when slightly bent and pressed into the hollow end of the post, holds the top securely in place without any threading. Removing the top requires a firm, straight pull to release the tension.
How does threadless jewellery work?

The decorative top has a thin pin extending from its back. Before insertion, this pin is bent slightly — typically between 15 and 45 degrees. When pressed into the post, the bend creates friction against the inner walls of the post tube, holding the top in place. The greater the bend, the more tension — though over-bending can deform the pin over time.
What is the difference between a threadless labret and a threaded labret?

A threaded labret top screws onto the post using an internal or external thread. A threadless labret top presses into place using a bent tension pin with no threads involved. The posts are not cross-compatible — threadless tops cannot be used on threaded posts, and vice versa.
What gauge threadless labret do I need?

Most cartilage piercings in the UK — helix, tragus, conch, flat — are pierced at 16g (1.2mm). Nostril piercings are often 18g (1.0mm), though 16g is also used. Medusa and philtrum piercings are typically 16g. If you're unsure, check your piercing documentation or ask your piercer before ordering.
What post length should I choose for a threadless labret?

For most healed cartilage placements, a 6mm post is standard. An 8mm post is common for placements where the anatomy requires a longer bar, or where some residual swelling is present. Medusa and philtrum piercings may require 8mm to 10mm. Your piercer can measure the correct length for your specific anatomy.
Are threadless labret tops interchangeable between brands?

Not reliably. While pin diameters are broadly standardised, post tube tolerances vary between manufacturers. A top from one brand may fit too loosely or too tightly in a post from another. For best results, use tops and posts from the same manufacturer or a confirmed compatible range.
Can I use a threadless labret for a new or healing piercing?

Threadless flat-back labrets are used by professional piercers as initial jewellery for certain placements because the flat back is better for tissue health than a protruding threaded end. However, the jewellery used in a new piercing should be selected and fitted by your piercer — not self-inserted. Do not change jewellery in an unhealed piercing without professional guidance.
What material threadless labret is best for sensitive skin?

Implant-grade titanium to ASTM F136 is the recommended choice for anyone with metal sensitivities or a nickel allergy. It is entirely nickel-free and biocompatible. Surgical steel contains nickel and is not appropriate for nickel-sensitive individuals, even though nickel release rates in healed piercings are generally low. The term hypoallergenic does not guarantee nickel-free construction — always check the specific material grade.
What piercings can use a threadless labret?

Threadless labret jewellery is suitable for a wide range of placements including helix, flat, tragus, conch, nostril, medusa, philtrum, lip, and flat lobe piercings. The flat-back design makes it particularly well-suited to placements where the back of the post sits against cartilage or soft tissue.
What is the difference between threadless and push-fit jewellery?

Push-fit jewellery presses a top into a tube end and relies on physical tolerance — the tightness of the fit — to stay in place. Threadless jewellery uses a bent tension pin as the active retention mechanism. They look similar and are often confused, but the systems are mechanically different and the components are not interchangeable.

Product Overview

Two-part threadless system: flat-back post and interchangeable decorative top secured by a bent tension pin — no threading required
Suitable for helix, tragus, conch, flat, nostril, medusa, philtrum, and flat lobe piercings
Available in 16g (1.2mm) and 18g (1.0mm) gauges with multiple post lengths from 6mm to 10mm
Decorative tops are interchangeable across compatible posts — one post, multiple styles
Style range includes flat discs, gem threadless labrets, opal threadless tops, spikes, and shaped pieces
Designed for healed piercings — flat back reduces pressure on tissue compared to protruding threaded ends
Available in implant-grade titanium, surgical steel, and gold options across the range

Specifications

Specification	Option A	Option B	Option C
Gauge	16g (1.2mm)	18g (1.0mm)	Not specified in provided data
Post Length	6mm	8mm	10mm
Material	Implant-grade titanium (ASTM F136)	Surgical steel (ASTM F138 / ISO 5832-1)	Gold (grade not specified in provided data)
Top Fitting	Threadless tension-pin system	Threadless tension-pin system	Threadless tension-pin system
Nickel Content	Nickel-free (titanium)	Contains nickel (steel)	Not specified in provided data

Professional Use

Threadless flat-back labrets are widely used by APP-aligned piercing studios as initial and downsize jewellery for cartilage and facial placements
Flat-back design is preferred for tissue health in placements where a protruding reverse-threaded end would contact cartilage or mucosal tissue
Implant-grade titanium to ASTM F136 is the material standard recommended by the Association of Professional Piercers for use in healing piercings
Interchangeable top system allows studios to swap decorative ends during downsize appointments without removing the post from the piercing channel
16g is the standard gauge for most cartilage placements in UK professional studios; 18g is more common for nostril and fine jewellery applications
Professional piercers sourcing studio stock should confirm post tube tolerance and pin diameter specifications before mixing brands across tops and posts

Safety & Contraindications

Threadless labret jewellery is intended for use in healed or professionally assessed piercings only — do not change jewellery in unhealed piercings without consulting a professional piercer
Individuals with confirmed nickel sensitivity should select implant-grade titanium (ASTM F136) options only — surgical steel contains nickel and is not suitable for nickel-sensitive individuals
The term hypoallergenic is not regulated and is not equivalent to implant-grade or nickel-free — verify material grade before purchase if sensitivity is a concern
Incorrect post length can cause embedding (too short) or excessive movement and snagging (too long) — verify correct sizing with your piercer before ordering
Threadless tops from different manufacturers may not be cross-compatible despite similar appearance — mixing brands risks tops that fail to hold or are difficult to remove
If any redness, swelling, discharge, or persistent irritation occurs around a piercing, remove jewellery only under professional guidance and seek medical advice if symptoms persist

Ordering & Shipping

Fast UK delivery available on all threadless labret jewellery orders — delivery timeframes displayed at checkout
First-time customers are eligible for a discount on their first order — offer applied at checkout
Bulk and multipack pricing available on select fittings — check individual product listings for availability
Orders are dispatched from the UK — no international customs delays for UK mainland customers
If you are unsure of your gauge or post length, contact Monster Piercing before ordering or consult your piercer — sizing exchanges may be subject to standard returns conditions

Disclaimer

FAQ

What is a threadless labret?

A threadless labret is a two-part piercing jewellery system consisting of a flat-back post and a decorative top. The top is fitted with a tension pin that, when slightly bent and pressed into the hollow end of the post, holds the top securely in place without any threading. Removing the top requires a firm, straight pull to release the tension.
How does threadless jewellery work?

The decorative top has a thin pin extending from its back. Before insertion, this pin is bent slightly — typically between 15 and 45 degrees. When pressed into the post, the bend creates friction against the inner walls of the post tube, holding the top in place. The greater the bend, the more tension — though over-bending can deform the pin over time.
What is the difference between a threadless labret and a threaded labret?

A threaded labret top screws onto the post using an internal or external thread. A threadless labret top presses into place using a bent tension pin with no threads involved. The posts are not cross-compatible — threadless tops cannot be used on threaded posts, and vice versa.
What gauge threadless labret do I need?

Most cartilage piercings in the UK — helix, tragus, conch, flat — are pierced at 16g (1.2mm). Nostril piercings are often 18g (1.0mm), though 16g is also used. Medusa and philtrum piercings are typically 16g. If you're unsure, check your piercing documentation or ask your piercer before ordering.
What post length should I choose for a threadless labret?

For most healed cartilage placements, a 6mm post is standard. An 8mm post is common for placements where the anatomy requires a longer bar, or where some residual swelling is present. Medusa and philtrum piercings may require 8mm to 10mm. Your piercer can measure the correct length for your specific anatomy.
Are threadless labret tops interchangeable between brands?

Not reliably. While pin diameters are broadly standardised, post tube tolerances vary between manufacturers. A top from one brand may fit too loosely or too tightly in a post from another. For best results, use tops and posts from the same manufacturer or a confirmed compatible range.
Can I use a threadless labret for a new or healing piercing?

Threadless flat-back labrets are used by professional piercers as initial jewellery for certain placements because the flat back is better for tissue health than a protruding threaded end. However, the jewellery used in a new piercing should be selected and fitted by your piercer — not self-inserted. Do not change jewellery in an unhealed piercing without professional guidance.
What material threadless labret is best for sensitive skin?

Implant-grade titanium to ASTM F136 is the recommended choice for anyone with metal sensitivities or a nickel allergy. It is entirely nickel-free and biocompatible. Surgical steel contains nickel and is not appropriate for nickel-sensitive individuals, even though nickel release rates in healed piercings are generally low. The term hypoallergenic does not guarantee nickel-free construction — always check the specific material grade.
What piercings can use a threadless labret?

Threadless labret jewellery is suitable for a wide range of placements including helix, flat, tragus, conch, nostril, medusa, philtrum, lip, and flat lobe piercings. The flat-back design makes it particularly well-suited to placements where the back of the post sits against cartilage or soft tissue.
What is the difference between threadless and push-fit jewellery?

Push-fit jewellery presses a top into a tube end and relies on physical tolerance — the tightness of the fit — to stay in place. Threadless jewellery uses a bent tension pin as the active retention mechanism. They look similar and are often confused, but the systems are mechanically different and the components are not interchangeable.

Price

Aufsteck-Labret

Der Monster-Halloween-Sale

Wholesale Form

Produkte vergleichen