Aufsteck-Labret
G23 Titan vergoldeter, juwelierter Threadless Push-Fit Flatback-Stecker
Verleihen Sie Ihrer Sammlung einen Hauch von raffinierter Eleganz mit diesem in Titan G23 eingefassten Labret. Ideal für einen eleganten, polierten...
Vollständige Details anzeigen
G23 Titan Schwarz PVD Threadless Push-Fit Labret mit runder CZ-Kugel
Dieses schlanke und raffinierte, in Titan G23 eingefasste Labret zeichnet sich durch einen brillanten Edelstein für dezenten Glanz aus. Ideal für N...
Vollständige Details anzeigen
G23 Titan Runder CZ Threadless Labret
Perfekt für Helix- oder Tragus-Piercings: Dieses Labret aus Titan G23 verfügt über einen klassischen, lünettengefassten Edelstein für ein sauberes,...
Vollständige Details anzeigen
925er Sterlingsilber und Bioflex Madonna-Labret mit klarem, geschliffenem Stein, Push-Fit-Aufsatz
Gefertigt aus 925er Sterlingsilber und flexiblem Bioflex, präsentiert das Labret einen funkelnden Zirkoniastein für zusätzlichen Glanz. Ideal für v...
Vollständige Details anzeigen
9K Gold CZ Stein oben innen Steckohrstecker
Veredeln Sie Ihren Look mit diesem 9K Gold Labret-Stecker, der mit einem funkelnden, klaren Edelstein für ein raffiniertes, elegantes Finish verseh...
Vollständige Details anzeigen
9K Gold Sternschliff Zirkonia Threadless Labret-Stecker
Glänzen Sie hell mit diesem bezaubernden sternförmigen Zirkonia-Stecker, gefertigt aus massivem 9K Gold. Entworfen mit einem internen Push-Fit-Mech...
Vollständige Details anzeigen
9K Gold Herz Zirkonia Stecker ohne Gewinde
Verleihen Sie Ihrer Piercing-Sammlung einen romantischen Touch mit diesem herzförmigen Zirkonia-Stecker, wunderschön gefertigt aus massivem 9K Gold...
Vollständige Details anzeigen
9K Gold Rund Zirkonia-besetzter Labret Stecker
Dieser flache 9K-Goldstecker ist mit einem schillernden, hochwertigen Zirkonia-Stein besetzt, der zeitlose Eleganz und edles Funkeln bietet. Das fl...
Vollständige Details anzeigen
9K Gold quadratischer Zirkonia-Flatback-Stecker
Dieser Nasenstecker aus 9 Karat Gold verfügt über einen auffälligen klaren Stein im Prinzessschliff in einer schlanken Krappenfassung für einen küh...
Vollständige Details anzeigen
14 Karat Gold mit im Labor gezüchteten Diamanten besetztem Push-Fit-Top
Verleihen Sie Ihrem Piercing raffinierte Eleganz mit diesem 14K Gold Push-Fit-Aufsatz, der mit einem funkelnden, im Labor gezüchteten Diamanten ver...
Vollständige Details anzeigen
14K Gold Internes Lippenlabret Einfache Perlenkugel Push Fit Top
Schlank und zeitlos, dieser 14K Gold Push-Fit Labret-Stecker verleiht jedem Piercing mühelose Eleganz. Entworfen mit einem hochglanzpolierten Kugel...
Vollständige Details anzeigen
14K Gold Lippenlabret mit rundem Zirkonia Push Fit Top
Diese 14K Gold Push-Fit Labret Nasenstecker verfügen über einen brillanten Solitärstein in einer klassischen Krappenfassung, erhältlich in Gelb- un...
Vollständige Details anzeigen
Labret für die innere Lippe aus 14 Karat Gold mit quadratischem Zirkonia-Stein und Schmucksteinen zum Aufstecken
Bereichern Sie Ihre Sammlung mit diesem 14K Gold Internal Lip Labret mit einem quadratischen Zirkonia-Stein und einem geschmückten Push-Fit-Aufsatz...
Vollständige Details anzeigen14K Gold Innenherz Zirkonia Stein Schmuckstein Steckverschluss
Dieser aus luxuriösem 14K Gold gefertigte Push-Fit-Labret-Nasenstecker zeigt einen atemberaubenden herzförmigen, klaren Stein in einer sicheren Kra...
Vollständige Details anzeigen
Labret für die innere Lippe aus 14 Karat Gold mit Stern-Zirkonia-Steckverschluss
Dieser aus strahlendem 14K Gold gefertigte Labret-Stecker verfügt über eine sechszackige Krallenfassung, die einen brillant geschliffenen Zirkonia ...
Vollständige Details anzeigen
14K Gold runder Zirkonia besetzter Push-Fit Aufsatz - 10mm Stecker
Verleihen Sie Ihrem Look einen Hauch zeitloser Eleganz mit diesem aus 14K Gold gefertigten Labret-Stecker, der für einen schlanken und bequemen Sit...
Vollständige Details anzeigen
Ohrstecker mit Schmucksteinen aus 14 Karat Gold
Veredeln Sie Ihren Look mit diesem klassischen 14K Gold Labret-Stecker, der einen brillanten, rund geschliffenen Edelstein in einer sicheren Krappe...
Vollständige Details anzeigen
14K Gold runder Zirkonia besetzter Push-Fit Aufsatz - 6mm Stab
Verleihen Sie Ihrem Look zeitlose Eleganz mit diesem Labret-Stecker aus 14K Gold, wunderschön gefertigt für einen eleganten und bequemen Sitz. Mit ...
Vollständige Details anzeigen
14K Gold Kugelkopf und BioFlex Ohrstecker
Verleihen Sie Ihrer Kollektion einen vielseitigen Touch mit diesem 14K Goldkugel-Kopf und BioFlex Stecker. Sein schlichtes, aber elegantes Design b...
Vollständige Details anzeigen
14K Gold Dreieck & BioFlex Ohrstecker
Dieses edle Stück verbindet Eleganz mit Komfort und besticht durch einen markanten dreieckig geschliffenen Edelstein in einer 14K Goldfassung, perf...
Vollständige Details anzeigen
Quadratischer Ohrstecker aus 14 Karat Gold und BioFlex
Der schicke Stecker verfügt über einen brillanten, quadratisch geschliffenen Kristall, der von 14K Goldzinken gehalten wird und Luxus mit minimalis...
Vollständige Details anzeigen
14K Gold Herzkopf und BioFlex Ohrstecker
Der elegante Ohrstecker kombiniert den Glanz einer 14K Goldfassung mit der Flexibilität und dem Komfort eines BioFlex-Stifts. Dieser Stecker ist pe...
Vollständige Details anzeigen
14K Gold Stern & BioFlex Ohrstecker
Werten Sie Ihr Piercing mit diesem eleganten sternförmigen Stecker auf, der mit einem funkelnden Zirkonia besetzt ist, der von 14K Goldzinken gehal...
Vollständige Details anzeigen
14K Gold Stern Top & BioFlex Ohrstecker
Zart und leicht – dieser 14K Gold Stern Labret Stecker verfügt über eine bezaubernde goldene Sternspitze, die mit einem flexiblen Bioflex-Stift für...
Vollständige Details anzeigenEntdecke threadless Labret-Schmuck bei Monster Piercing. Aus implantatgeeignetem Titan, Chirurgenstahl und Gold, in den Größen 16G und 18G sowie mit einer großen Auswahl an dekorativen Aufsätzen und Stifthängen. Schnelle Lieferung innerhalb Großbritanniens. Rabatt auf die erste Bestellung verfügbar.
- Two-part threadless system: flat-back post and interchangeable decorative top secured by a bent tension pin — no threading required
- Suitable for helix, tragus, conch, flat, nostril, medusa, philtrum, and flat lobe piercings
- Available in 16g (1.2mm) and 18g (1.0mm) gauges with multiple post lengths from 6mm to 10mm
- Decorative tops are interchangeable across compatible posts — one post, multiple styles
- Style range includes flat discs, gem threadless labrets, opal threadless tops, spikes, and shaped pieces
- Designed for healed piercings — flat back reduces pressure on tissue compared to protruding threaded ends
- Available in implant-grade titanium, surgical steel, and gold options across the range
| Specification | Option A | Option B | Option C |
|---|---|---|---|
| Gauge | 16g (1.2mm) | 18g (1.0mm) | Not specified in provided data |
| Post Length | 6mm | 8mm | 10mm |
| Material | Implant-grade titanium (ASTM F136) | Surgical steel (ASTM F138 / ISO 5832-1) | Gold (grade not specified in provided data) |
| Top Fitting | Threadless tension-pin system | Threadless tension-pin system | Threadless tension-pin system |
| Nickel Content | Nickel-free (titanium) | Contains nickel (steel) | Not specified in provided data |
- Threadless flat-back labrets are widely used by APP-aligned piercing studios as initial and downsize jewellery for cartilage and facial placements
- Flat-back design is preferred for tissue health in placements where a protruding reverse-threaded end would contact cartilage or mucosal tissue
- Implant-grade titanium to ASTM F136 is the material standard recommended by the Association of Professional Piercers for use in healing piercings
- Interchangeable top system allows studios to swap decorative ends during downsize appointments without removing the post from the piercing channel
- 16g is the standard gauge for most cartilage placements in UK professional studios; 18g is more common for nostril and fine jewellery applications
- Professional piercers sourcing studio stock should confirm post tube tolerance and pin diameter specifications before mixing brands across tops and posts
- Threadless labret jewellery is intended for use in healed or professionally assessed piercings only — do not change jewellery in unhealed piercings without consulting a professional piercer
- Individuals with confirmed nickel sensitivity should select implant-grade titanium (ASTM F136) options only — surgical steel contains nickel and is not suitable for nickel-sensitive individuals
- The term hypoallergenic is not regulated and is not equivalent to implant-grade or nickel-free — verify material grade before purchase if sensitivity is a concern
- Incorrect post length can cause embedding (too short) or excessive movement and snagging (too long) — verify correct sizing with your piercer before ordering
- Threadless tops from different manufacturers may not be cross-compatible despite similar appearance — mixing brands risks tops that fail to hold or are difficult to remove
- If any redness, swelling, discharge, or persistent irritation occurs around a piercing, remove jewellery only under professional guidance and seek medical advice if symptoms persist
- Fast UK delivery available on all threadless labret jewellery orders — delivery timeframes displayed at checkout
- First-time customers are eligible for a discount on their first order — offer applied at checkout
- Bulk and multipack pricing available on select fittings — check individual product listings for availability
- Orders are dispatched from the UK — no international customs delays for UK mainland customers
- If you are unsure of your gauge or post length, contact Monster Piercing before ordering or consult your piercer — sizing exchanges may be subject to standard returns conditions
All threadless labret jewellery sold by Monster Piercing is intended for use on healed or professionally assessed piercings. Aftercare and healing times vary by individual. Nothing on this page constitutes medical or professional piercing advice. Consult a qualified professional piercer or licensed medical provider before changing jewellery in any unhealed or healing piercing. Material safety information provided reflects general material standards — individual product specifications should be verified on each product listing before purchase. Monster Piercing does not accept liability for adverse reactions resulting from incorrect sizing, incompatible materials, or use in unhealed tissue contrary to professional guidance.
-
What is a threadless labret?
A threadless labret is a two-part piercing jewellery system consisting of a flat-back post and a decorative top. The top is fitted with a tension pin that, when slightly bent and pressed into the hollow end of the post, holds the top securely in place without any threading. Removing the top requires a firm, straight pull to release the tension.
-
How does threadless jewellery work?
The decorative top has a thin pin extending from its back. Before insertion, this pin is bent slightly — typically between 15 and 45 degrees. When pressed into the post, the bend creates friction against the inner walls of the post tube, holding the top in place. The greater the bend, the more tension — though over-bending can deform the pin over time.
-
What is the difference between a threadless labret and a threaded labret?
A threaded labret top screws onto the post using an internal or external thread. A threadless labret top presses into place using a bent tension pin with no threads involved. The posts are not cross-compatible — threadless tops cannot be used on threaded posts, and vice versa.
-
What gauge threadless labret do I need?
Most cartilage piercings in the UK — helix, tragus, conch, flat — are pierced at 16g (1.2mm). Nostril piercings are often 18g (1.0mm), though 16g is also used. Medusa and philtrum piercings are typically 16g. If you're unsure, check your piercing documentation or ask your piercer before ordering.
-
What post length should I choose for a threadless labret?
For most healed cartilage placements, a 6mm post is standard. An 8mm post is common for placements where the anatomy requires a longer bar, or where some residual swelling is present. Medusa and philtrum piercings may require 8mm to 10mm. Your piercer can measure the correct length for your specific anatomy.
-
Are threadless labret tops interchangeable between brands?
Not reliably. While pin diameters are broadly standardised, post tube tolerances vary between manufacturers. A top from one brand may fit too loosely or too tightly in a post from another. For best results, use tops and posts from the same manufacturer or a confirmed compatible range.
-
Can I use a threadless labret for a new or healing piercing?
Threadless flat-back labrets are used by professional piercers as initial jewellery for certain placements because the flat back is better for tissue health than a protruding threaded end. However, the jewellery used in a new piercing should be selected and fitted by your piercer — not self-inserted. Do not change jewellery in an unhealed piercing without professional guidance.
-
What material threadless labret is best for sensitive skin?
Implant-grade titanium to ASTM F136 is the recommended choice for anyone with metal sensitivities or a nickel allergy. It is entirely nickel-free and biocompatible. Surgical steel contains nickel and is not appropriate for nickel-sensitive individuals, even though nickel release rates in healed piercings are generally low. The term hypoallergenic does not guarantee nickel-free construction — always check the specific material grade.
-
What piercings can use a threadless labret?
Threadless labret jewellery is suitable for a wide range of placements including helix, flat, tragus, conch, nostril, medusa, philtrum, lip, and flat lobe piercings. The flat-back design makes it particularly well-suited to placements where the back of the post sits against cartilage or soft tissue.
-
What is the difference between threadless and push-fit jewellery?
Push-fit jewellery presses a top into a tube end and relies on physical tolerance — the tightness of the fit — to stay in place. Threadless jewellery uses a bent tension pin as the active retention mechanism. They look similar and are often confused, but the systems are mechanically different and the components are not interchangeable.
- Two-part threadless system: flat-back post and interchangeable decorative top secured by a bent tension pin — no threading required
- Suitable for helix, tragus, conch, flat, nostril, medusa, philtrum, and flat lobe piercings
- Available in 16g (1.2mm) and 18g (1.0mm) gauges with multiple post lengths from 6mm to 10mm
- Decorative tops are interchangeable across compatible posts — one post, multiple styles
- Style range includes flat discs, gem threadless labrets, opal threadless tops, spikes, and shaped pieces
- Designed for healed piercings — flat back reduces pressure on tissue compared to protruding threaded ends
- Available in implant-grade titanium, surgical steel, and gold options across the range
| Specification | Option A | Option B | Option C |
|---|---|---|---|
| Gauge | 16g (1.2mm) | 18g (1.0mm) | Not specified in provided data |
| Post Length | 6mm | 8mm | 10mm |
| Material | Implant-grade titanium (ASTM F136) | Surgical steel (ASTM F138 / ISO 5832-1) | Gold (grade not specified in provided data) |
| Top Fitting | Threadless tension-pin system | Threadless tension-pin system | Threadless tension-pin system |
| Nickel Content | Nickel-free (titanium) | Contains nickel (steel) | Not specified in provided data |
- Threadless flat-back labrets are widely used by APP-aligned piercing studios as initial and downsize jewellery for cartilage and facial placements
- Flat-back design is preferred for tissue health in placements where a protruding reverse-threaded end would contact cartilage or mucosal tissue
- Implant-grade titanium to ASTM F136 is the material standard recommended by the Association of Professional Piercers for use in healing piercings
- Interchangeable top system allows studios to swap decorative ends during downsize appointments without removing the post from the piercing channel
- 16g is the standard gauge for most cartilage placements in UK professional studios; 18g is more common for nostril and fine jewellery applications
- Professional piercers sourcing studio stock should confirm post tube tolerance and pin diameter specifications before mixing brands across tops and posts
- Threadless labret jewellery is intended for use in healed or professionally assessed piercings only — do not change jewellery in unhealed piercings without consulting a professional piercer
- Individuals with confirmed nickel sensitivity should select implant-grade titanium (ASTM F136) options only — surgical steel contains nickel and is not suitable for nickel-sensitive individuals
- The term hypoallergenic is not regulated and is not equivalent to implant-grade or nickel-free — verify material grade before purchase if sensitivity is a concern
- Incorrect post length can cause embedding (too short) or excessive movement and snagging (too long) — verify correct sizing with your piercer before ordering
- Threadless tops from different manufacturers may not be cross-compatible despite similar appearance — mixing brands risks tops that fail to hold or are difficult to remove
- If any redness, swelling, discharge, or persistent irritation occurs around a piercing, remove jewellery only under professional guidance and seek medical advice if symptoms persist
- Fast UK delivery available on all threadless labret jewellery orders — delivery timeframes displayed at checkout
- First-time customers are eligible for a discount on their first order — offer applied at checkout
- Bulk and multipack pricing available on select fittings — check individual product listings for availability
- Orders are dispatched from the UK — no international customs delays for UK mainland customers
- If you are unsure of your gauge or post length, contact Monster Piercing before ordering or consult your piercer — sizing exchanges may be subject to standard returns conditions
All threadless labret jewellery sold by Monster Piercing is intended for use on healed or professionally assessed piercings. Aftercare and healing times vary by individual. Nothing on this page constitutes medical or professional piercing advice. Consult a qualified professional piercer or licensed medical provider before changing jewellery in any unhealed or healing piercing. Material safety information provided reflects general material standards — individual product specifications should be verified on each product listing before purchase. Monster Piercing does not accept liability for adverse reactions resulting from incorrect sizing, incompatible materials, or use in unhealed tissue contrary to professional guidance.
-
What is a threadless labret?
A threadless labret is a two-part piercing jewellery system consisting of a flat-back post and a decorative top. The top is fitted with a tension pin that, when slightly bent and pressed into the hollow end of the post, holds the top securely in place without any threading. Removing the top requires a firm, straight pull to release the tension.
-
How does threadless jewellery work?
The decorative top has a thin pin extending from its back. Before insertion, this pin is bent slightly — typically between 15 and 45 degrees. When pressed into the post, the bend creates friction against the inner walls of the post tube, holding the top in place. The greater the bend, the more tension — though over-bending can deform the pin over time.
-
What is the difference between a threadless labret and a threaded labret?
A threaded labret top screws onto the post using an internal or external thread. A threadless labret top presses into place using a bent tension pin with no threads involved. The posts are not cross-compatible — threadless tops cannot be used on threaded posts, and vice versa.
-
What gauge threadless labret do I need?
Most cartilage piercings in the UK — helix, tragus, conch, flat — are pierced at 16g (1.2mm). Nostril piercings are often 18g (1.0mm), though 16g is also used. Medusa and philtrum piercings are typically 16g. If you're unsure, check your piercing documentation or ask your piercer before ordering.
-
What post length should I choose for a threadless labret?
For most healed cartilage placements, a 6mm post is standard. An 8mm post is common for placements where the anatomy requires a longer bar, or where some residual swelling is present. Medusa and philtrum piercings may require 8mm to 10mm. Your piercer can measure the correct length for your specific anatomy.
-
Are threadless labret tops interchangeable between brands?
Not reliably. While pin diameters are broadly standardised, post tube tolerances vary between manufacturers. A top from one brand may fit too loosely or too tightly in a post from another. For best results, use tops and posts from the same manufacturer or a confirmed compatible range.
-
Can I use a threadless labret for a new or healing piercing?
Threadless flat-back labrets are used by professional piercers as initial jewellery for certain placements because the flat back is better for tissue health than a protruding threaded end. However, the jewellery used in a new piercing should be selected and fitted by your piercer — not self-inserted. Do not change jewellery in an unhealed piercing without professional guidance.
-
What material threadless labret is best for sensitive skin?
Implant-grade titanium to ASTM F136 is the recommended choice for anyone with metal sensitivities or a nickel allergy. It is entirely nickel-free and biocompatible. Surgical steel contains nickel and is not appropriate for nickel-sensitive individuals, even though nickel release rates in healed piercings are generally low. The term hypoallergenic does not guarantee nickel-free construction — always check the specific material grade.
-
What piercings can use a threadless labret?
Threadless labret jewellery is suitable for a wide range of placements including helix, flat, tragus, conch, nostril, medusa, philtrum, lip, and flat lobe piercings. The flat-back design makes it particularly well-suited to placements where the back of the post sits against cartilage or soft tissue.
-
What is the difference between threadless and push-fit jewellery?
Push-fit jewellery presses a top into a tube end and relies on physical tolerance — the tightness of the fit — to stay in place. Threadless jewellery uses a bent tension pin as the active retention mechanism. They look similar and are often confused, but the systems are mechanically different and the components are not interchangeable.