What are threadless tops?

Threadless tops are the decorative end pieces used in a push fit body jewellery system. They attach to a compatible threadless post or labret using a bent-pin tension mechanism — no screwing required. The slight bend in the pin creates resistance when inserted into the post, holding the top securely in place.

How do push fit piercing tops work?

The pin on the back of a threadless top is bent at a slight angle — typically 30 to 45 degrees. When you press the top into a compatible threadless post, the pin straightens slightly against the internal walls of the post, creating a tension fit. To remove, you gently pull the top straight out. No tools, no threading.

What gauge are threadless tops?

Most threadless tops are available in 16g (1.2mm), 18g (1.0mm), and 20g (0.8mm). The gauge of the top must match the gauge of your threadless post. Check your existing post's gauge before ordering — using a mismatched gauge will result in a poor or insecure fit.

Are threadless tops compatible with all piercing posts?

No. Threadless tops only work with threadless (push fit) posts and labrets. They are not compatible with internally threaded or externally threaded fittings. If your current jewellery uses a screw-on end, it uses a different system and requires a different type of top.

What is the difference between threadless and internally threaded jewellery?

Internally threaded jewellery has a screw socket recessed inside the post — the decorative end screws in. Threadless jewellery uses a bent-pin tension fit with no threading. Threadless tops are generally faster to swap and remove the risk of cross-threading, which makes them popular for cartilage placements and frequent jewellery changes.

Which piercings use threadless tops?

Threadless tops are commonly used in helix, flat, tragus, conch, and anti-tragus ear piercings, as well as nostril and labret piercings. Any piercing that uses a threadless post or threadless labret as its base fitting is compatible with threadless tops.

Are implant-grade titanium threadless tops safe for sensitive ears?

Implant-grade titanium manufactured to ASTM F136 standard contains no nickel and is widely recommended by professional piercers for individuals with metal sensitivities. Where a product is listed as implant-grade titanium, this standard applies. Always check the individual product listing to confirm material grade.

Can I use threadless tops in a healing piercing?

Threadless tops are intended for healed or professionally assessed piercings. Changing jewellery in an unhealed piercing can cause irritation, extend healing time, or introduce infection risk. If your piercing is new or still healing, consult a qualified professional piercer before changing your jewellery.

What size threadless top do I need?

End size refers to the visible diameter of the decorative top — separate from gauge. Gem threadless tops typically range from 2mm to 6mm. The right size depends on your anatomy, piercing placement, and personal preference. Smaller ends (2mm–3mm) suit finer placements like nostril and tragus; larger ends (4mm–6mm) have more visual presence in helix or flat piercings.

Do you deliver threadless tops to UK addresses?

Yes. All orders are dispatched from within the UK. Delivery timeframes and options are displayed at checkout. New customers receive a discount on their first purchase.

Threadless Tops

97 - 113 of 113 products

排序方式

查看方式

Product Overview

Specifications

Professional Use

Safety & Material Information

Ordering & Shipping

Disclaimer

FAQ

Decorative push fit ends designed for use with threadless posts and threadless labrets — no screwing or threading required
Available in implant-grade titanium, surgical steel, and gold across a range of styles including gem tops, opal push fit tops, cluster threadless tops, and floral designs
Compatible with 16g (1.2mm), 18g (1.0mm), and 20g (0.8mm) threadless posts — gauge must match your existing post
End sizes typically range from 2mm to 7mm diameter — suitable for a range of placements from nostril to helix to flat piercing
Suitable for healed piercings in cartilage placements (helix, tragus, flat, conch), nostril, and labret positions
Interchangeable across compatible threadless posts — one post, multiple tops
Fast UK delivery — all orders dispatched from within the UK

Attribute	Options Available	Notes
Gauge (Pin Diameter)	16g (1.2mm), 18g (1.0mm), 20g (0.8mm)	Must match internal diameter of threadless post
End Diameter	2mm – 7mm (style dependent)	Gem and opal tops typically 2mm–6mm; cluster tops may sit wider
Materials	Implant-grade titanium, surgical steel, gold	Implant-grade titanium manufactured to ASTM F136 standard where specified
System Compatibility	Push fit / threadless posts and labrets	Not compatible with internally or externally threaded fittings
Styles	Gem, opal, cluster, floral, star, plain disc	Range varies — filter by style in collection
Fitting Mechanism	Bent-pin tension fit	No tools required for insertion or removal

Suitable for use by professional piercers and studios sourcing interchangeable decorative ends for client jewellery changes
Implant-grade titanium threadless tops (ASTM F136 where specified) are appropriate for use in professionally assessed healed piercings
Push fit system allows fast, tool-free end changes during client appointments — no threading required
Interchangeable across compatible threadless posts from standard suppliers — verify gauge compatibility with your post inventory before ordering
Not intended for use in unhealed or actively healing piercings without professional assessment — consult qualified piercer guidance on appropriate jewellery for each healing stage
Bulk and multipack pricing available on select fittings — contact Monster Piercing for studio or trade enquiries

Implant-grade titanium threadless tops are manufactured to ASTM F136 standard where specified — this grade contains no nickel and is intended to support biocompatibility in body jewellery applications
Surgical steel threadless tops contain a small percentage of nickel within the alloy — not recommended as a first choice for individuals with confirmed nickel sensitivity
Gold threadless tops should be solid gold (14k or 18k) for material integrity — gold-plated pieces may expose base metal beneath the plating over time
Threadless tops are intended for use on healed or professionally assessed piercings only — do not self-insert jewellery into unhealed or irritated piercings
Gauge compatibility must be verified before purchase — an incorrect gauge fit can cause tissue pressure, irritation, or difficulty removing the fitting
If you experience redness, swelling, discharge, or discomfort around a piercing, remove jewellery only under professional guidance and consult a qualified piercer or licensed medical provider

All threadless tops dispatched from within the UK — no international shipping delays on domestic orders
Fast UK delivery on all orders — delivery timeframes displayed at checkout
New customers receive a discount on their first purchase — applied automatically or via checkout code
Filter the collection by gauge, material, and style to find compatible tops for your existing threadless posts
Bulk and multipack options available on selected fittings — suitable for studios or collectors building out a threadless top inventory
Returns and exchange information available in the Monster Piercing returns policy — not specified in provided data for specific terms

Threadless tops sold by Monster Piercing are intended for use on healed or professionally assessed piercings only. Material suitability, gauge compatibility, and piercing readiness vary by individual — consult a qualified professional piercer or licensed medical provider before changing jewellery in a new or healing piercing. Information provided on this page is for guidance purposes only and does not constitute professional medical or piercing advice. Monster Piercing makes no claim that any product heals, treats, cures, or prevents any infection, skin condition, or medical issue. Material grade claims (e.g. ASTM F136 implant-grade titanium) apply only to products where this is explicitly stated in the product listing.

What are threadless tops?

Threadless tops are the decorative end pieces used in a push fit body jewellery system. They attach to a compatible threadless post or labret using a bent-pin tension mechanism — no screwing required. The slight bend in the pin creates resistance when inserted into the post, holding the top securely in place.
How do push fit piercing tops work?

The pin on the back of a threadless top is bent at a slight angle — typically 30 to 45 degrees. When you press the top into a compatible threadless post, the pin straightens slightly against the internal walls of the post, creating a tension fit. To remove, you gently pull the top straight out. No tools, no threading.
What gauge are threadless tops?

Most threadless tops are available in 16g (1.2mm), 18g (1.0mm), and 20g (0.8mm). The gauge of the top must match the gauge of your threadless post. Check your existing post's gauge before ordering — using a mismatched gauge will result in a poor or insecure fit.
Are threadless tops compatible with all piercing posts?

No. Threadless tops only work with threadless (push fit) posts and labrets. They are not compatible with internally threaded or externally threaded fittings. If your current jewellery uses a screw-on end, it uses a different system and requires a different type of top.
What is the difference between threadless and internally threaded jewellery?

Internally threaded jewellery has a screw socket recessed inside the post — the decorative end screws in. Threadless jewellery uses a bent-pin tension fit with no threading. Threadless tops are generally faster to swap and remove the risk of cross-threading, which makes them popular for cartilage placements and frequent jewellery changes.
Which piercings use threadless tops?

Threadless tops are commonly used in helix, flat, tragus, conch, and anti-tragus ear piercings, as well as nostril and labret piercings. Any piercing that uses a threadless post or threadless labret as its base fitting is compatible with threadless tops.
Are implant-grade titanium threadless tops safe for sensitive ears?

Implant-grade titanium manufactured to ASTM F136 standard contains no nickel and is widely recommended by professional piercers for individuals with metal sensitivities. Where a product is listed as implant-grade titanium, this standard applies. Always check the individual product listing to confirm material grade.
Can I use threadless tops in a healing piercing?

Threadless tops are intended for healed or professionally assessed piercings. Changing jewellery in an unhealed piercing can cause irritation, extend healing time, or introduce infection risk. If your piercing is new or still healing, consult a qualified professional piercer before changing your jewellery.
What size threadless top do I need?

End size refers to the visible diameter of the decorative top — separate from gauge. Gem threadless tops typically range from 2mm to 6mm. The right size depends on your anatomy, piercing placement, and personal preference. Smaller ends (2mm–3mm) suit finer placements like nostril and tragus; larger ends (4mm–6mm) have more visual presence in helix or flat piercings.
Do you deliver threadless tops to UK addresses?

Yes. All orders are dispatched from within the UK. Delivery timeframes and options are displayed at checkout. New customers receive a discount on their first purchase.

Product Overview

Decorative push fit ends designed for use with threadless posts and threadless labrets — no screwing or threading required
Available in implant-grade titanium, surgical steel, and gold across a range of styles including gem tops, opal push fit tops, cluster threadless tops, and floral designs
Compatible with 16g (1.2mm), 18g (1.0mm), and 20g (0.8mm) threadless posts — gauge must match your existing post
End sizes typically range from 2mm to 7mm diameter — suitable for a range of placements from nostril to helix to flat piercing
Suitable for healed piercings in cartilage placements (helix, tragus, flat, conch), nostril, and labret positions
Interchangeable across compatible threadless posts — one post, multiple tops
Fast UK delivery — all orders dispatched from within the UK

Specifications

Attribute	Options Available	Notes
Gauge (Pin Diameter)	16g (1.2mm), 18g (1.0mm), 20g (0.8mm)	Must match internal diameter of threadless post
End Diameter	2mm – 7mm (style dependent)	Gem and opal tops typically 2mm–6mm; cluster tops may sit wider
Materials	Implant-grade titanium, surgical steel, gold	Implant-grade titanium manufactured to ASTM F136 standard where specified
System Compatibility	Push fit / threadless posts and labrets	Not compatible with internally or externally threaded fittings
Styles	Gem, opal, cluster, floral, star, plain disc	Range varies — filter by style in collection
Fitting Mechanism	Bent-pin tension fit	No tools required for insertion or removal

Professional Use

Suitable for use by professional piercers and studios sourcing interchangeable decorative ends for client jewellery changes
Implant-grade titanium threadless tops (ASTM F136 where specified) are appropriate for use in professionally assessed healed piercings
Push fit system allows fast, tool-free end changes during client appointments — no threading required
Interchangeable across compatible threadless posts from standard suppliers — verify gauge compatibility with your post inventory before ordering
Not intended for use in unhealed or actively healing piercings without professional assessment — consult qualified piercer guidance on appropriate jewellery for each healing stage
Bulk and multipack pricing available on select fittings — contact Monster Piercing for studio or trade enquiries

Safety & Material Information

Implant-grade titanium threadless tops are manufactured to ASTM F136 standard where specified — this grade contains no nickel and is intended to support biocompatibility in body jewellery applications
Surgical steel threadless tops contain a small percentage of nickel within the alloy — not recommended as a first choice for individuals with confirmed nickel sensitivity
Gold threadless tops should be solid gold (14k or 18k) for material integrity — gold-plated pieces may expose base metal beneath the plating over time
Threadless tops are intended for use on healed or professionally assessed piercings only — do not self-insert jewellery into unhealed or irritated piercings
Gauge compatibility must be verified before purchase — an incorrect gauge fit can cause tissue pressure, irritation, or difficulty removing the fitting
If you experience redness, swelling, discharge, or discomfort around a piercing, remove jewellery only under professional guidance and consult a qualified piercer or licensed medical provider

Ordering & Shipping

All threadless tops dispatched from within the UK — no international shipping delays on domestic orders
Fast UK delivery on all orders — delivery timeframes displayed at checkout
New customers receive a discount on their first purchase — applied automatically or via checkout code
Filter the collection by gauge, material, and style to find compatible tops for your existing threadless posts
Bulk and multipack options available on selected fittings — suitable for studios or collectors building out a threadless top inventory
Returns and exchange information available in the Monster Piercing returns policy — not specified in provided data for specific terms

Disclaimer

FAQ

What are threadless tops?

Threadless tops are the decorative end pieces used in a push fit body jewellery system. They attach to a compatible threadless post or labret using a bent-pin tension mechanism — no screwing required. The slight bend in the pin creates resistance when inserted into the post, holding the top securely in place.
How do push fit piercing tops work?

The pin on the back of a threadless top is bent at a slight angle — typically 30 to 45 degrees. When you press the top into a compatible threadless post, the pin straightens slightly against the internal walls of the post, creating a tension fit. To remove, you gently pull the top straight out. No tools, no threading.
What gauge are threadless tops?

Most threadless tops are available in 16g (1.2mm), 18g (1.0mm), and 20g (0.8mm). The gauge of the top must match the gauge of your threadless post. Check your existing post's gauge before ordering — using a mismatched gauge will result in a poor or insecure fit.
Are threadless tops compatible with all piercing posts?

No. Threadless tops only work with threadless (push fit) posts and labrets. They are not compatible with internally threaded or externally threaded fittings. If your current jewellery uses a screw-on end, it uses a different system and requires a different type of top.
What is the difference between threadless and internally threaded jewellery?

Internally threaded jewellery has a screw socket recessed inside the post — the decorative end screws in. Threadless jewellery uses a bent-pin tension fit with no threading. Threadless tops are generally faster to swap and remove the risk of cross-threading, which makes them popular for cartilage placements and frequent jewellery changes.
Which piercings use threadless tops?

Threadless tops are commonly used in helix, flat, tragus, conch, and anti-tragus ear piercings, as well as nostril and labret piercings. Any piercing that uses a threadless post or threadless labret as its base fitting is compatible with threadless tops.
Are implant-grade titanium threadless tops safe for sensitive ears?

Implant-grade titanium manufactured to ASTM F136 standard contains no nickel and is widely recommended by professional piercers for individuals with metal sensitivities. Where a product is listed as implant-grade titanium, this standard applies. Always check the individual product listing to confirm material grade.
Can I use threadless tops in a healing piercing?

Threadless tops are intended for healed or professionally assessed piercings. Changing jewellery in an unhealed piercing can cause irritation, extend healing time, or introduce infection risk. If your piercing is new or still healing, consult a qualified professional piercer before changing your jewellery.
What size threadless top do I need?

End size refers to the visible diameter of the decorative top — separate from gauge. Gem threadless tops typically range from 2mm to 6mm. The right size depends on your anatomy, piercing placement, and personal preference. Smaller ends (2mm–3mm) suit finer placements like nostril and tragus; larger ends (4mm–6mm) have more visual presence in helix or flat piercings.
Do you deliver threadless tops to UK addresses?

Yes. All orders are dispatched from within the UK. Delivery timeframes and options are displayed at checkout. New customers receive a discount on their first purchase.

Price

Threadless Tops

Wholesale Form

比较产品