What is a flatback labret stud?

A flatback labret stud is a body jewellery piece consisting of a straight post with a flat disc on one end and a decorative top on the other. Unlike standard labret studs with a rounded or domed back, the flat disc sits flush against the skin, reducing pressure and making it more comfortable for piercings in the lip, ear cartilage, nose, and other placements where a domed back would press into tissue.

What is the difference between threadless and threaded labret studs?

Threaded labret studs have a screw mechanism where the decorative top threads onto or into the post. Internal threading, where the thread sits inside the post, is preferred because nothing rough passes through the piercing during insertion. Threadless labret studs, also called push fit labret studs, use a small bent pin on the top that inserts into a hollow post and is held in place by tension. Threadless tops and threaded tops are not interchangeable as the connection pin or thread is different on each system.

What size flatback labret stud do I need?

You need to know two measurements: gauge (post thickness) and post length. The most common gauge for ear and facial piercings is 1.2mm (16g). Lip and labret piercings may use 1.2mm or 1.6mm (14g) depending on the studio. For post length, 6mm is standard for healed piercings. If you are in the initial healing phase, your piercer may have fitted a longer post of 8mm or more to accommodate swelling. If you are unsure of your sizing, ask your piercer before ordering.

Are implant grade titanium flatback labrets safe for healing piercings?

Implant grade titanium conforming to ASTM F136 is widely used in professional piercing for initial jewellery, including in healing piercings. It is nickel-free and biocompatible. However, whether a specific piece of jewellery is appropriate for your healing piercing depends on your individual circumstances including placement, healing progress, and health history. Always consult your professional piercer or a medical provider before changing jewellery in a healing piercing.

Can I use a flatback labret stud in my tragus, helix, or conch piercing?

Yes. Flatback labret studs are used across a wide range of ear cartilage piercings including tragus, helix, flat, conch, rook, and forward helix, as well as facial placements including lip, medusa, Monroe, and nose. The flat disc back makes them particularly suited to cartilage piercings where a domed back would press uncomfortably against the inner ear.

Does surgical steel labret jewellery contain nickel?

Yes. Surgical steel conforming to ASTM F138 does contain a small amount of nickel, which is bound within the alloy structure. For the majority of people this presents no issue. However, individuals with a confirmed nickel allergy or sensitivity should choose implant grade titanium (ASTM F136) or another nickel-free material instead.

Can I mix threadless tops from different brands with my existing flatback base?

Threadless tops from different brands are often compatible as long as they share the same gauge and use the standard threadless pin format. However, compatibility is not guaranteed across all manufacturers as pin diameter, bend angle, and post inner diameter can vary. If you are mixing tops and bases from different sources, check compatibility carefully. When in doubt, buy a complete set including top and base from the same listing.

How do I change a flatback labret stud?

For threaded styles, hold the flat back disc steady against the skin and unscrew the top by rotating it to the left. For threadless (push-fit) styles, hold the post steady and pull the top directly outward with no twisting needed. When inserting a threadless top, push the pin into the post until it holds firm. If you are changing jewellery in a piercing that has not fully healed, this should be done by a professional piercer and not at home.

Flatback Labret Studs

169 - 192 of 557 products

Sort by

View as

Product Overview

Specifications

Professional Use

Safety & Contraindications

Ordering & Shipping

Disclaimer

FAQ

Flatback labret studs available in threadless (push-fit) and threaded systems. Tops are not interchangeable between systems.
Range includes titanium flatback labrets, surgical steel labret studs, and bioflex labret studs across multiple styles and post lengths.
Suitable for lip, labret, medusa, Monroe, tragus, helix, conch, flat, rook, nose, and forward helix piercings.
Decorative tops available separately for threadless systems, including crystal labret stud tops, opal labret stud tops, and gold flatback labret options.
Standard gauges: 1.2mm (16g) and 1.6mm (14g). Standard post lengths from 6mm upward.
Hypoallergenic labret studs available in implant grade titanium, intended to support use by metal-sensitive individuals and in healed piercings subject to professional assessment.
Fast UK delivery on all orders. New customers receive a discount on their first purchase.

Specification	Threadless (Push-Fit)	Threaded (Internal)	Notes
Connection system	Bent-pin tension fit	Internal screw thread	Tops not interchangeable between systems
Common gauge	1.2mm (16g), 1.6mm (14g)	1.2mm (16g), 1.6mm (14g)	Confirm gauge with piercer before ordering
Standard post lengths	6mm, 8mm, 10mm	6mm, 8mm, 10mm	6mm typical for healed piercings. Longer posts used during initial healing.
Materials available	Implant grade titanium (ASTM F136), surgical steel (ASTM F138), bioflex	Implant grade titanium (ASTM F136), surgical steel (ASTM F138)	Bioflex available in threadless formats only
Top styles	Crystal, opal, ball, flat disc, cluster, plain	Crystal, opal, ball, flat disc, plain	Gold flatback labret options available in select styles

Flatback labret studs are the recommended stud format for initial piercing setups in lip, labret, medusa, Monroe, tragus, helix, conch, and nose placements, consistent with current APP (Association of Professional Piercers) jewellery guidelines.
Implant grade titanium (ASTM F136) flatback labrets are intended to minimise tissue reactivity and are used in initial piercings and for clients with documented metal sensitivities.
Longer post lengths (8mm, 10mm) are used at time of piercing to accommodate swelling. Downsizing to a shorter post, typically 6mm, once swelling has resolved is standard professional practice.
Threadless (push-fit) systems are preferred by many piercers for ease of top changes without post removal, reducing disruption to healing tissue.
Surgical steel labret studs (ASTM F138) contain trace nickel within the alloy. Implant grade titanium is the preferred material for clients with confirmed nickel sensitivity.
Bioflex labret studs are used in clinical or imaging contexts where metal jewellery is contraindicated. Not recommended as primary piercing jewellery.

Always confirm gauge and post length with your professional piercer before purchasing replacement or upgrade jewellery. Incorrect sizing can cause embedding, migration, or prolonged healing.
Implant grade titanium (ASTM F136) is the recommended material for healing piercings and for individuals with metal or nickel sensitivities. Surgical steel (ASTM F138) contains trace nickel and may not be appropriate for all individuals.
Do not change jewellery in a healing piercing without professional assessment. Premature jewellery changes are a leading cause of piercing complications.
Threadless tops must be correctly tensioned before wear. A pin with insufficient bend will not hold securely. If a top feels loose after insertion, remove and adjust the pin bend before wearing.
Bioflex labret studs are not intended for long-term everyday wear. Use only for specific clinical or practical purposes and return to metal jewellery when appropriate.
If you experience prolonged redness, swelling, discharge, or pain around a piercing, consult a qualified professional piercer or licensed medical provider. Do not self-treat.

Fast UK delivery on all orders, shipped UK-wide from Monster Piercing.
New customers receive a discount on their first purchase.
Threadless tops and bases are sold separately in many listings. Confirm you are purchasing the correct component (top, base, or set) before checkout.
If ordering for a healing piercing, confirm your current gauge and post length with your piercer before placing your order. Returns or exchanges on incorrectly sized body jewellery may be limited for hygiene reasons.
Bulk and multipack pricing available on select fittings, suitable for professional piercers and studios sourcing stock.
For queries on sizing, compatibility, or materials, contact Monster Piercing directly before ordering.

Flatback labret studs sold by Monster Piercing are body jewellery products intended for use in healed or professionally assessed piercings. They are not medical devices and are not intended to diagnose, treat, cure, or prevent any medical condition, infection, or skin disorder.

Material descriptions including implant grade titanium ASTM F136 and surgical steel ASTM F138 reflect standard industry designations. Individual responses to materials vary. If you have a known metal allergy, sensitivity, or skin condition, consult a qualified medical professional before use.

Healing times, aftercare requirements, and jewellery suitability vary by individual, piercing placement, and health status. Always consult a qualified professional piercer or licensed medical provider for guidance specific to your piercing. Content on this page is for informational purposes only and does not constitute professional piercing or medical advice.

What is a flatback labret stud?

A flatback labret stud is a body jewellery piece consisting of a straight post with a flat disc on one end and a decorative top on the other. Unlike standard labret studs with a rounded or domed back, the flat disc sits flush against the skin, reducing pressure and making it more comfortable for piercings in the lip, ear cartilage, nose, and other placements where a domed back would press into tissue.
What is the difference between threadless and threaded labret studs?

Threaded labret studs have a screw mechanism where the decorative top threads onto or into the post. Internal threading, where the thread sits inside the post, is preferred because nothing rough passes through the piercing during insertion. Threadless labret studs, also called push fit labret studs, use a small bent pin on the top that inserts into a hollow post and is held in place by tension. Threadless tops and threaded tops are not interchangeable as the connection pin or thread is different on each system.
What size flatback labret stud do I need?

You need to know two measurements: gauge (post thickness) and post length. The most common gauge for ear and facial piercings is 1.2mm (16g). Lip and labret piercings may use 1.2mm or 1.6mm (14g) depending on the studio. For post length, 6mm is standard for healed piercings. If you are in the initial healing phase, your piercer may have fitted a longer post of 8mm or more to accommodate swelling. If you are unsure of your sizing, ask your piercer before ordering.
Are implant grade titanium flatback labrets safe for healing piercings?

Implant grade titanium conforming to ASTM F136 is widely used in professional piercing for initial jewellery, including in healing piercings. It is nickel-free and biocompatible. However, whether a specific piece of jewellery is appropriate for your healing piercing depends on your individual circumstances including placement, healing progress, and health history. Always consult your professional piercer or a medical provider before changing jewellery in a healing piercing.
Can I use a flatback labret stud in my tragus, helix, or conch piercing?

Yes. Flatback labret studs are used across a wide range of ear cartilage piercings including tragus, helix, flat, conch, rook, and forward helix, as well as facial placements including lip, medusa, Monroe, and nose. The flat disc back makes them particularly suited to cartilage piercings where a domed back would press uncomfortably against the inner ear.
Does surgical steel labret jewellery contain nickel?

Yes. Surgical steel conforming to ASTM F138 does contain a small amount of nickel, which is bound within the alloy structure. For the majority of people this presents no issue. However, individuals with a confirmed nickel allergy or sensitivity should choose implant grade titanium (ASTM F136) or another nickel-free material instead.
Can I mix threadless tops from different brands with my existing flatback base?

Threadless tops from different brands are often compatible as long as they share the same gauge and use the standard threadless pin format. However, compatibility is not guaranteed across all manufacturers as pin diameter, bend angle, and post inner diameter can vary. If you are mixing tops and bases from different sources, check compatibility carefully. When in doubt, buy a complete set including top and base from the same listing.
How do I change a flatback labret stud?

For threaded styles, hold the flat back disc steady against the skin and unscrew the top by rotating it to the left. For threadless (push-fit) styles, hold the post steady and pull the top directly outward with no twisting needed. When inserting a threadless top, push the pin into the post until it holds firm. If you are changing jewellery in a piercing that has not fully healed, this should be done by a professional piercer and not at home.

Product Overview

Flatback labret studs available in threadless (push-fit) and threaded systems. Tops are not interchangeable between systems.
Range includes titanium flatback labrets, surgical steel labret studs, and bioflex labret studs across multiple styles and post lengths.
Suitable for lip, labret, medusa, Monroe, tragus, helix, conch, flat, rook, nose, and forward helix piercings.
Decorative tops available separately for threadless systems, including crystal labret stud tops, opal labret stud tops, and gold flatback labret options.
Standard gauges: 1.2mm (16g) and 1.6mm (14g). Standard post lengths from 6mm upward.
Hypoallergenic labret studs available in implant grade titanium, intended to support use by metal-sensitive individuals and in healed piercings subject to professional assessment.
Fast UK delivery on all orders. New customers receive a discount on their first purchase.

Specifications

Specification	Threadless (Push-Fit)	Threaded (Internal)	Notes
Connection system	Bent-pin tension fit	Internal screw thread	Tops not interchangeable between systems
Common gauge	1.2mm (16g), 1.6mm (14g)	1.2mm (16g), 1.6mm (14g)	Confirm gauge with piercer before ordering
Standard post lengths	6mm, 8mm, 10mm	6mm, 8mm, 10mm	6mm typical for healed piercings. Longer posts used during initial healing.
Materials available	Implant grade titanium (ASTM F136), surgical steel (ASTM F138), bioflex	Implant grade titanium (ASTM F136), surgical steel (ASTM F138)	Bioflex available in threadless formats only
Top styles	Crystal, opal, ball, flat disc, cluster, plain	Crystal, opal, ball, flat disc, plain	Gold flatback labret options available in select styles

Professional Use

Flatback labret studs are the recommended stud format for initial piercing setups in lip, labret, medusa, Monroe, tragus, helix, conch, and nose placements, consistent with current APP (Association of Professional Piercers) jewellery guidelines.
Implant grade titanium (ASTM F136) flatback labrets are intended to minimise tissue reactivity and are used in initial piercings and for clients with documented metal sensitivities.
Longer post lengths (8mm, 10mm) are used at time of piercing to accommodate swelling. Downsizing to a shorter post, typically 6mm, once swelling has resolved is standard professional practice.
Threadless (push-fit) systems are preferred by many piercers for ease of top changes without post removal, reducing disruption to healing tissue.
Surgical steel labret studs (ASTM F138) contain trace nickel within the alloy. Implant grade titanium is the preferred material for clients with confirmed nickel sensitivity.
Bioflex labret studs are used in clinical or imaging contexts where metal jewellery is contraindicated. Not recommended as primary piercing jewellery.

Safety & Contraindications

Always confirm gauge and post length with your professional piercer before purchasing replacement or upgrade jewellery. Incorrect sizing can cause embedding, migration, or prolonged healing.
Implant grade titanium (ASTM F136) is the recommended material for healing piercings and for individuals with metal or nickel sensitivities. Surgical steel (ASTM F138) contains trace nickel and may not be appropriate for all individuals.
Do not change jewellery in a healing piercing without professional assessment. Premature jewellery changes are a leading cause of piercing complications.
Threadless tops must be correctly tensioned before wear. A pin with insufficient bend will not hold securely. If a top feels loose after insertion, remove and adjust the pin bend before wearing.
Bioflex labret studs are not intended for long-term everyday wear. Use only for specific clinical or practical purposes and return to metal jewellery when appropriate.
If you experience prolonged redness, swelling, discharge, or pain around a piercing, consult a qualified professional piercer or licensed medical provider. Do not self-treat.

Ordering & Shipping

Fast UK delivery on all orders, shipped UK-wide from Monster Piercing.
New customers receive a discount on their first purchase.
Threadless tops and bases are sold separately in many listings. Confirm you are purchasing the correct component (top, base, or set) before checkout.
If ordering for a healing piercing, confirm your current gauge and post length with your piercer before placing your order. Returns or exchanges on incorrectly sized body jewellery may be limited for hygiene reasons.
Bulk and multipack pricing available on select fittings, suitable for professional piercers and studios sourcing stock.
For queries on sizing, compatibility, or materials, contact Monster Piercing directly before ordering.

Disclaimer

FAQ

What is a flatback labret stud?

A flatback labret stud is a body jewellery piece consisting of a straight post with a flat disc on one end and a decorative top on the other. Unlike standard labret studs with a rounded or domed back, the flat disc sits flush against the skin, reducing pressure and making it more comfortable for piercings in the lip, ear cartilage, nose, and other placements where a domed back would press into tissue.
What is the difference between threadless and threaded labret studs?

Threaded labret studs have a screw mechanism where the decorative top threads onto or into the post. Internal threading, where the thread sits inside the post, is preferred because nothing rough passes through the piercing during insertion. Threadless labret studs, also called push fit labret studs, use a small bent pin on the top that inserts into a hollow post and is held in place by tension. Threadless tops and threaded tops are not interchangeable as the connection pin or thread is different on each system.
What size flatback labret stud do I need?

You need to know two measurements: gauge (post thickness) and post length. The most common gauge for ear and facial piercings is 1.2mm (16g). Lip and labret piercings may use 1.2mm or 1.6mm (14g) depending on the studio. For post length, 6mm is standard for healed piercings. If you are in the initial healing phase, your piercer may have fitted a longer post of 8mm or more to accommodate swelling. If you are unsure of your sizing, ask your piercer before ordering.
Are implant grade titanium flatback labrets safe for healing piercings?

Implant grade titanium conforming to ASTM F136 is widely used in professional piercing for initial jewellery, including in healing piercings. It is nickel-free and biocompatible. However, whether a specific piece of jewellery is appropriate for your healing piercing depends on your individual circumstances including placement, healing progress, and health history. Always consult your professional piercer or a medical provider before changing jewellery in a healing piercing.
Can I use a flatback labret stud in my tragus, helix, or conch piercing?

Yes. Flatback labret studs are used across a wide range of ear cartilage piercings including tragus, helix, flat, conch, rook, and forward helix, as well as facial placements including lip, medusa, Monroe, and nose. The flat disc back makes them particularly suited to cartilage piercings where a domed back would press uncomfortably against the inner ear.
Does surgical steel labret jewellery contain nickel?

Yes. Surgical steel conforming to ASTM F138 does contain a small amount of nickel, which is bound within the alloy structure. For the majority of people this presents no issue. However, individuals with a confirmed nickel allergy or sensitivity should choose implant grade titanium (ASTM F136) or another nickel-free material instead.
Can I mix threadless tops from different brands with my existing flatback base?

Threadless tops from different brands are often compatible as long as they share the same gauge and use the standard threadless pin format. However, compatibility is not guaranteed across all manufacturers as pin diameter, bend angle, and post inner diameter can vary. If you are mixing tops and bases from different sources, check compatibility carefully. When in doubt, buy a complete set including top and base from the same listing.
How do I change a flatback labret stud?

For threaded styles, hold the flat back disc steady against the skin and unscrew the top by rotating it to the left. For threadless (push-fit) styles, hold the post steady and pull the top directly outward with no twisting needed. When inserting a threadless top, push the pin into the post until it holds firm. If you are changing jewellery in a piercing that has not fully healed, this should be done by a professional piercer and not at home.

Price

Flatback Labret Studs

Wholesale Form

Compare products